M99 (KZ)

DSC06353DSC06353
DSC06357-EditDSC06357-Edit
DSC06354-EditDSC06354-Edit
DSC06356-EditDSC06356-Edit
DSC06355-EditDSC06355-Edit
Untitled-1Untitled-1
_9-DSC04218_2_9-DSC04218_2
DSC06389 copyDSC06389 copy
DSC06340DSC06340
DSC06344DSC06344
DSC06346-EditDSC06346-Edit

CHASSIS DR RACING KART - M99

The new recently licensed M99 chassis completes the range of the DR racing chassis. The frame is in 30mm NiCrMo tubes for the longerons and in 32mm NiCrMo tubes for the cross-bars, plus it allows a great number of regulations. Both rigidity and height can be varied; the first through the use of specific torsion bars and the latter can be regulated both front and rear. The range for both camber and caster regulations is quite wide, thanks to the Sniper regulation system. The chassis will be equipped with new model KG508 bodyworks, a rear KG C3 bodywork and a new adhesives kit.

It is possible to choose the VEN11 DD brake system for the Direct Drive categories and the VEN11 KZ for the Shifter/KZ categories, or the VEN13 DD innovative brake system for Direct Drive categories and the VEN13 KZ for the Shifter/KZ categories; the most outstanding feature regards the pump, which presents an innovative system capable of modulating the braking action denominated ABA (adaptive brake assistant). By means of a regulator, it will be possible to adjust the pump allowing an internal system to manage the braking force, avoiding the blockage of the tires. This mechanism allows braking at the limit, but without reaching the blockage of the tires, so as to avoid bouncing of the rear axis and the loss of adherence to the correct line of entrance into curves. A feature to point out is how this function may be adjusted in relation to the needs of the category (different powers) and the tires used (different grip), as well as the feeling desired by the individual driver. The “range” of the adjustment of this system may vary from neutral, therefore no regulation, up to the management of the blockage by applying maximum pressure on the brake pedal. 

Furthermore, thanks to specific axis flanges, it will be possible to variate the wheelbase.

Frame Material

chrome molybdenum steell

Tubes diameter

Ø30 - 32

Wheel Base

1042mm

Axle

D.50

Braking System

V11 - V13

Bodywork

KG 508

Accessories

Torsion front bar
Magnesium wheels

MORE INFO

seers cmp badge
en_USEN